The Gretz Aero Pitot Tube Mounting Bracket Kit is designed to be installed on all of the very popular Van's RV aircraft series, but it can also be installed easily on other metal wing aircraft,. as well as composite, and tube and fabric aircraft with very minor modifications to the kit parts. Once installed, this Pitot mounting bracket system is very easy to remove and to re-install.
The mount brackets come in two finishes. High polished chrome and a paintable finish.
When ordering the Gretz Aero Pitot Tube Mounting Bracket Kit, you must order for the Pitot tube to be used. There are some minor differences of screw hole diameter for the mounting of the Pitot to the bracket.
Our Pitot Tube Mounting Bracket Kits include the following:
Mounting Bracket
Laser cut Backing Plate
Laser cut Washer Plate
All mounting screws, nutplates and rivets
Complete installation instructions with photos
The Gretz Aero Heated Pitot Tube Mounting Bracket Kits are designed to hold many of the popular Pitot tubes. They include:
Gretz Aero GA-1000
Gretz Aero GA-500
AN5812
AN5814
PH502-12CR
Dynon
Fly More
Facon
Chrome Finish Pitot Tube Mounting Bracket Kit: for GA-1000, & GA-500, also, AN5812, PH502-12CR, Dynon, and Fly More
part # CBK12 $125
Chrome Finish Pitot Tube Mounting Bracket Kit for AN5814
part # CBK14$125
Paintable Finish Pitot Tube Mounting Bracket Kit for GA-1000, & GA-500, also, AN5812, PH502-12CR, Dynon, and Fly More
part # PBK12$102
Paintable Finish Pitot Tube Mounting Bracket Kit for AN5814
part # PBK14$102
Paintable Finish Non-Drilled Pitot Tube Mounting Bracket Kit for Falcon
part # PBKND$98
--Please Note: Pitot tubes are Not included in Kits or Kit prices!
--Mounting Brackets with chrome finish cannot be guaranteed against gravel or sand chips!
